PHILADELPHIA ORCHESTRA Tchaikovsky No 5 LP ML-4400 R VG C EX (LP-1217)

MPN: VLTEX100LP, 3000 Hours

MPN: VLTEX240LP, 3000 Hours

Flex-a-tone creates a wave of eerie, saw-like sounds, through a varied pitch, by bending the spring steel with thumb pressure as the wooden balls mounted to each side strike the surface.

LONG-TERM PROTECTION LPS 3(R) protects metal parts stored indoors for up to two years. LPS 3(R) forms a soft, self-healing, waxy film that acts as an effective barrier sealing out moisture, acid, dirt, sand, dust and other corrosive elements. LPS 3(R) also provides non-sling lubrication. It is safe to use on most surfaces and does not contain any chlorinated solvents or silicone. It is non-conductive and non-staining. NSF H2 registration #129027: (aerosol); #059849: (bulk). Meets or Exceeds these Specs: * Boeing BMS-3-23 Type II * MIL-C-16173D Grade 2 Class 1 * DMS 2150 * Airbus TN A 007.10138 Type 1 Grade 2 * NSF registered H2

Leveling Mount, Low Profile Type, Thread Size 5/8-11, Base Dia 3 In, Load Capacity 4500 Lb, Height 4 1/16 In, Bolt Length 3 In, Construction Steel, Finish Clear Zinc, Includes Jam Nut

LP1-C6L Low Profile Steel Leveling Mount 5/8-11 x 3" Manufacturer: S W S W Item Number: LP1-C6L DESCRIPTION / SPECS: Item : Leveling Mount Type : Low Profile Thread Size : 5/8-11 Base Dia. (In.) : 3 Load Capacity (Lb.) : 4500 Height (In.) : 4-1/16 Bolt Length (In.) : 3 Construction : Steel Finish : Clear Zinc Includes : Jam Nut CONDITION:New New-Not Original Packaging INCLUDES:Item(s) described above and exactly what's pictured Just a Few Simple Notes on Shipping and Other Questions Below "Free

No Description

Lps SEPTLS42802916 Prevents seizure up to 1800 F (982 C). Lead free. Protects against seizure, heat-freeze, galling, rust and corrosion. Cushions impact and shock loads. Will not run, drip or settle out. Not affected by contraction, expansion or vibration. Permits reuse of fittings, saves stud, bolt and nut replacements. Reduces wrench torque.

CO2 (carbon dioxide) is needed by plants for proper growth. CO2 can be added by burning propane or natural gas - cheaper and easier to obtain than bottled CO2. The Gas Pro uses faster, more reliable, more efficient, electronic spark ignition. When the Gas Pro is turned on, spark and pilot gas start. When the pilot is lit, spark stops and main gas turns on and is lit by pilot. When the Gas Pro turns off, all gas turns off. Spark is better than standing/continuous pilot because they must be manually lit, burn all the time, and waste gas. Spark is faster and more reliable than a glow plug - no time needed for glow plug to heat up, spark ignites immediately. Both Propane and Natural Gas models available. Each have two sizes - a six burner and a twelve burner. The Propane model includes a regulator for connection to a propane tank. Gas hose (20 ft.) included with all models. Strong 18 gage steel enclosure - powder coated for heat and rust resistance. Heat exchanger allows forced air cooling if desired. Plug the included 120V power supply into a controller or timer. Alternatively, the Gas Pro allows easy connection of a CO2-400 controller. Just plug CO2-400 's 10 ft. cable into connector on the side of Gas Pro. Extension cable available. No separate power supply needed - it draws power from the Gas Pro. The CO2-400 has a display and buttons for showing present PPM and setting desired PPM level.

Endurance™ Restaurant Range, 48", gas, (8) 30, 000 BTU burners with lift-off burner heads, (1) convection oven base, s/s front, sides, back riser & high shelf, fully MIG welded frame, 6" adjustable legs, 275, 000 BTU/hr, CSA, NSF, LP