12MM BRAIDED HIGH-VOLTAGE SLEEVING 1200V 25FT

No Description

The 4 Bank Battery Tender Charging Station is four encased 1.25 amp battery chargers designed to fully charge a battery and maintain it at proper storage voltage without the damaging effects caused by trickle chargers. Each of the 4 leads is 27.25" long and has a positive and negative alligator clip. Additional Cables that come with the Battery Tender: Qty Cable Length 4 Ring Terminal Cable 2 Ft. Long 4 Alligator Clips 2 Ft. Long These battery tenders are never used and are never over thirty days old! 4 independant charging stations. 12 volts @ 1.25 amps per station. Extremely Lightweight - Less than 3 pounds! 100-240 VAC 50/60Hz.

Inverter Specifications. Input battery voltage range 9 to 15.5 VDC. Nominal AC output voltage 120 VAC 5% 1. Output frequency and accuracy 60 Hz 0.1% 60 Hz 0.1%. 1 msec surge current (amps AC) 42. 100 msec surge current (amps AC) 23. 5 sec surge power (real watts) 2100. 10 sec surge power (reall watts) 1900. 30 sec surge power (real watts) 1750. 5 min surge power (real watts) 1450. 30 min surge power (real watts) 1375. Continuous power output at 25° C (with 1.0 PF) 1200 VA. Continuous current output 10 AAC. Maximum continuous input current 160 ADC. Inverter efficiency 95%. Transfer time 16 msecs. No Load (120 VAC output) 1.3 ADC. Waveform Modified Sine Wave. Charger Specifications. Continuous output at 25° C 70 ADC. Charger efficiency 88%. Power factor > 0.95. Input current at rated output (AC amps) 9. General Features and Capabilities. Transfer relay capability 12 AAC. Battery temperature compensation Yes on models with chargers: standard temp sensor (battery temp 0 50° C). Remote available (optional) Yes MM-RC or ME-RC. Internal cooling 0 to 59 cfm variable speed. Overcurrent protection Yes with two overlapping circuits. Overtemperature protection Yes on transformer and MOSFETS. On/Off with status indicator Yes front mounted and easily accessible. Low battery cutout 10 VDC adjustable on most models with the ME-RC remote. AC output and input Hardwire. Output circuit breaker 15 A switchable. Input circuit breaker16 AAC.

The 10 mil PET braid provides a lightweight and flexible covering that is quiet compared to other cable coverings. The F6 provides complete coverage around plugs and connectors with its 25% edge overlap. Unlike rigid tubing, F6 can be bent into a tight radius without distorting or splitting open.

The 10 mil PET braid provides a lightweight and flexible covering that is quiet compared to other cable coverings. The F6 provides complete coverage around plugs and connectors with its 25% edge overlap. Unlike rigid tubing, F6 can be bent into a tight radius without distorting or splitting open.

Element, M (120V, 1200W). Franklin Machine Products provides a wide range of replacement parts, supplies, accessories, and light equipment for restaurants and the food service industry. 120V 1200W For APW/WYOTT warmer models BM-30 BM-80 series TM-43 TM-43D TM-90 TM-90D W-3 W-3-V 120 volt 1200 watt

LiteFuze Convertingbox 1200 Watt Voltage Converter 1000 1200 Watt Maximum Capacity Heavy-Duty Voltage Converter / Transformer Input: 110V/120V or 220V/230V/240V (Single Phase) Output 110V/120V or 220V/230V/240V (Single Phase) Automatic Input Voltage Selection Two outlets for output/input in the front (Smart Socket allows for simple plug n use!) Single phase Dual Step Up or Step Down functionality Key Features: Up to 1200 Watt continuous use capacity Step Up/Down Functionality: Step Down: Converts Single Phase 220/230/240-volt Electricity to 110/120-volt Step Up: Converts 110/120-volt Electricity to Single Phase 220/230/240-volt US Patented Universal Output Socket - accepts virtually any plug from around the world. convertingbox Noise reduction technology convertingbox half-weight technology *Efficiency Factor: 1.25 Dynamic casing design offers ventilation to the voltage transformer Fully Grounded Transformer from Input to Output for safe operation CE Certified Lifetime Warranty 3 Amps * 220 volt = 660 watts

ProMelt electric radiant snow melting mats install easily and quickly providing electrically heated driveways and walkways. Energy efficient and environmentally friendly snow and ice removal in the worst conditions is possible without using nasty chemicals or corrosive salt. ProMelt heated snow melting mats are manufactured in the USA by SunTouch Watts Radiant (pioneers of indoor radiant heat) using superior quality snow melting cable attached to a reinforced tape grid simplifying installation while maintaining optimum spacing of cables. Plus, you can free the cable from the mat to fill in or fit steps, curved or angled spaces as needed. ProMelt is an effective, reliable and invisible snow melting system that will serve you for many years. Typical projects of 300 SF or less simply require mats and a snow sensor-controller and are very affordable and convenient. ProMelt Snow Melting Benefits: ProMelt mats install quicker and easier than cable systems with no spacing errors.

The Leviton Series 2000 line of revenue-grade meters meets all measurement and verification based opportunities - including load management and LEED rating achievement. Designed to provide a simple and effective process for accurately capturing measurements of power consumption, Series 2000 Meters are easy to specify and install for new construction and retrofits. Leviton meters utilize highly accurate current transformers for revenue-grade performance certified to ANSI standards. Competing products use current sensors that do not provide the same level of performance. Leviton offers CTs in solid and split core styles to accommodate all phases of installation and construction. Solid core CTs are ideal for new construction, when power is not live and wires can easily be threaded through the core. Split core CTs can be installed at any time without having to disconnect wire terminations, making them the optimal choice for retrofitting an existing structure. Split core CTs close securely for fast, precise installation with no need for time-consuming tie wraps and no worries about improper seating or core half separation. Both solid and split core CTs offer high quality, long term accuracy and reliability. Every Series 2000 Meter has an installer-friendly feedback feature. The red reverse phase indicator acts as an installation diagnostics tool and illuminates if a meter is improperly installed. After installation, the green duty cycle light shows that the meter is collecting electrical consumption data at the appropriate rate. All 100 and 200 Amp solid core CTs have color-coded labels to easily identify correct line/load orientation.

Element (Quartz, 120V, 1200W). Franklin Machine Products provides a wide range of replacement parts, supplies, accessories, and light equipment for restaurants and the food service industry. Quartz 120V 1200W Red 120 volt 1200 watts 19-1/2" (49.5cm) L For Lang cheese melter models MM24 MM48